How to choose the quick connector

How to choose the quick connector

1, fluid type, temperature (selected for the type of fluid, the temperature of the body material and seal material quick coupling)

According to the fluid for the body material, seal material is different. For example, quick connector is air. Recommended iron or steel, the water is selected brass or stainless steel.
2, the pressure of the liquid (selected for fluid pressure the pressure performance of the quick connector)
The fluid pressure is the key to selected quick connector. Hydraulic quick connector 5.0Mpa (51kgf/cm ²)-68.6Mpa (700kgf/cm ²) to form a series between the corresponding pressure characteristics of the quick connector structure is also different.
3, the structure of the automatic switching valve (quick connector selected for the use of piping valve constructed)
For the structure of the valve, two-way switching, one-way switching and two-way open. In addition to the two switching in theseparation, the outflow of fluid from the piping. So please pay attention.
4, the use of the environment of the quick connector (see the selected constructor for use of the environment, material quick coupling)
Combined with environmental humidity, dust conditions, and prone to corrosion, such as the use of the environment, to considerthe selected type of quick connector body material, seal material.
5, to confirm the selection of the quick connector connecting thread to be consistent
The process of using different brands, the best female and male of the same brand used in conjunction with, if you must cross to use the best technical staff before consulting product supply-side, after the confirmation again.
6, the installation of the shape, size (in determining the final shape and size after order)
Make sure the quick joint type and material, and specify the corresponding characteristics of piping assembly shape and size.Please note that size is connected with the fluid flow

Home

WaveJoin

Products

Application

Technology

Contact Us